1. Performance Characteristic
We adopt the international advanced technology for this machine , the AL Bar transported by feed cam , the length of the AL Bar can be adjust freely . It also can be added double AL Bars if necessary . And the machine is low power consumption and much lighter .
2. Technical Parameter :
2.1 Supply Power: AC380V or 220V 50HZ
2.2 Power : 6KW
2.3 Designed Speed : 200pcs/minute
2.4 Optimum Speed : 100 -160pcs/minute
2.5 Dimensions : 6000*800*1500mm
2.6 Net Weight:1200kg
4.1 Place the non-woven farbics ,AL Bar(2.8-3mm/w) ,meltblown on the feeding framework ,
4.2 Adjust the hand wheel to make the centers in a same line.
4.3 Open the main machine and ultrasonic welding equipment
4.4 Check the position of the edge folding pressure plate
4.5 Adjust the position of the AL Bar .
4.6 Check the position of the reshape roller , to be sure the 3 folding in the center of the mask .
4.7 Adjust the welding pressure to be sure welding fastness .
4.8 Adjust the position of the blade to be sure the mask cutting accuratly. Adjust the blade to be higher 0.5-0.7mm than the roller surface .
5.1 Scheduled check the main parts ,such as the axletree bearings ,ensure all the bearing lubricating enough.
5.2 Scheduled check the welding head mechanical wearing conditions , adjust the pressure to a suitable state , try to adjust the pressure to be minimum at the station of welding well .
5.3 Often check the tensile force of the raw material coils ,ensure all the materials running in step & the surface with no laxation.
5.4 Please adjust the pressure of the cutting blade to avoid blading damage.