Semi automatic flat mask production line adopts advanced design, only need to put the raw material on the feeding rack, after the completion of the modulating, the machine can realize automatic production. It only need one person to operate and fully realize the whole process of automatic production. The equipment also adopts ultrasonic welding, which is beautiful, sanitary, environmental friendly.
The output is 100-120 pcs/min. The length of nose bridge bar can be adjusted. The product size error is ±1mm. According to the needs, replacing parts of the molds can achieve a variety of specifications of mask pieces. This machine can produce all kinds of non woven masks, smooth cloth masks, gauze masks, activated carbon masks, double-nasal line masks. Support 1-5 layers of non woven mask sheet production.
1. Introduction to equipment
The automatic mask body machine is mainly used for the automatic forming of flat plane masks. After the entire roll of fabric is
unrolled, it is driven by rollers.Thefabric is automatically unfolded by automatic hemming, hemming, and the nose bridge. In
both sides, the sealing is achieved by ultrasonic welding on both sides. After the ultrasonic side sealing, cuttingisperformed by
a cutter, and thewhole process is automatically controlled. Only one person is required to operate this machine. The scientific
and reasonable mechanicaltransmission configuration makes this machine extremely efficient. The special welding wheel and
cutter wheel design have good abrasion resistance and greatly increase the service life of the product.
2. Equipment installation and configuration requirements
Equipment size: 3500mm (L) x 1100mm(W) x 2100mm (H);
Working voltage: AC220V,50 / 60HZ, rated power: 4KW
Compressed air: 0.5-0.7Mpa
Operating environment: temperature 10-35 ℃, humidity 5-35% HR, no flammability, corrosive gas, no dust (cleanness noless
3. Equipment characteristics
The machine adopts aluminum alloy structure, small size, stable operation and low scrap rate;
Equippedwith photoelectricdetection and automatic counting, which can control the production speed and high output;
It can produce 100 pieces per minute, and can produce (3-6 layers) multilayer masks.